BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a forward bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a back bumper
      Removal and installation of the back shock-absorber
      Removal and cover installation обтекателя
      Removal and installation of a forward wing
      Removal and cowl installation
      Cowl adjustment
      Removal and installation of a cover of a luggage carrier
      Adjustment of a cover of a luggage carrier
      Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier
      Removal and installation газонаполненного an emphasis of a cowl/cover of a luggage carrier
      Replacement молдингов and model emblems
      Removal, installation and door adjustment
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and window adjustment
      Removal and installation electric стеклоподъемника
      Removal and electric motor installation стеклоподъемника
      Removal and installation of a mirror of an external kind / a sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and cowl installation

Cowl, loops, газонаполненный the shock-absorber and a cowl drive

1 — a cowl
2 — lateral consolidation
3 — consolidations back
4 — газонаполненный the shock-absorber
5 — a loop left
6 — the drive lever
7 — a cowl drive back
8 — a spherical support
9 — an emphasis
10 — a lock pin

11 — a clamp
12 — a cowl drive central
13 — a support for a hook
14 — screw M6 x 35
15 — the clown
16 — a nut with a washer
17 — the cowl lock
18 — a drive of a cowl lateral
19 — a cross-beam a lobby


 REMOVAL

1 Rasstykujte a socket of atomizers стеклоомывателя.
2 Separate шланговое connection of atomizers стеклоомывателя.

3 Mark position of a loop-1 on a cowl for what lead round a loop a felt-tip pen.

4 Prop up a cowl or ask the assistant to take.
5 Turn out a bolt-2 at the left and on the right, ослабьте a bolt-3.
6 Disconnect on the left loop a cable of weight-4.
7 Remove a cowl by means of the assistant.


 INSTALLATION

8 Establish a cowl by means of the assistant, screw bolts-2, without tightening them.
9 Expose a cowl according to the put marks and tighten fastening bolts.
10 If the cowl was replaced on new, adjust it.