BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the panel of devices
      Removal and facing installation forward parts of area of feet
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of a drive сдвижной roof panels
      Removal and installation of a mirror of an interior
      Mirror of an interior with automatic blackout
      Removal and installation of lateral facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a cover of a luggage carrier
      Removal and installation of a headrest of a forward seat
      Натяжитель a seat belt. The basic data and security measures
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of atomizers стеклоомывателя
      Adjustment of atomizers стеклоомывателя
      Removal, installation and check of atomizers фароомывателя
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of the central console

 REMOVAL

1 Remove upwards two hands the handle-2 levers of a gear change.

2 Disconnect a cover-1 levers of switching and remove it upward.

3 Disconnect a cover-1 levers of switching and remove it through the lever.

4 Open a curtain-1 and press completely downwards. Thus, the ashtray-2 or the pocket established instead of it is wrung out upwards.

5 Take out an ashtray/pocket upwards.

6 Turn out two screws of fastening of the holder-3. Position of screws is shown on an illustration by a position - And-.

7 Rasstykujte an ashtray socket.

8 Turn out screws-1.

9 Open clamps-2 and-3 and remove a peak-4 upwards. If necessary take out a cable of a lamp of illumination of an ashtray-5.

Positions of clamps are designated on point 13 illustration in subsection "Installation".

10 Turn out-2, расстыкуйте on the back party a socket of the switch and remove a peak.

11 Lift, if is available, the central armrest-1.

12 Raise the central console-2 behind and remove through the central armrest and the lever of a lay brake-3.


 REMOVAL

13 Check up, whether-4 clamps-2 and-3, and also directing-5 are damaged at a peak. If necessary a peak replace.

14 Installation is carried out in sequence, return to removal.